Industry News

Changzhou Haoxiang Electronics Co., Ltd. Home / News / Industry News / Haptic Actuator Selection Guide: Piezo vs ERM vs LRA Trade-Offs Explained

Haptic Actuator Selection Guide: Piezo vs ERM vs LRA Trade-Offs Explained

Imagine a design review where the UX team asks for a crisper click on a touch panel, while the mechanical engineer says there is less than 2 mm of space behind the glass. The haptic actuator you select decides whether the product feels premium or cheap, and the decision is rarely about the actuator alone.

Most comparisons focus on four families: eccentric rotating mass (ERM), linear resonant actuator (LRA), voice coil actuator (VCA), and piezoelectric (piezo) actuator. The mistake engineers make is comparing only peak acceleration and price. Settling time, temperature behaviour, drive voltage, audible noise, and supply-chain maturity matter just as much in production.

Bottom line: choose piezo haptics for fast response, thin construction, and long life; choose an LRA for cost-effective, strong vibration when space allows; keep ERM for simple alerts with a generous budget; and reserve voice coils for high-definition effects where cost and size are secondary.

How Haptic Actuators Convert Electrical Signals into Touch

A haptic actuator is a transducer that converts an electrical signal into mechanical displacement. The four families differ in how that displacement is generated and how quickly it stops.

ERM

A DC motor spins an eccentric weight. Amplitude follows motor speed, response is loose, and the operating band sits around 100-250 Hz. Cheap, but slow to start and stop.

LRA

A mass suspended by a spring is driven near resonance, typically 150-180 Hz. High acceleration at resonance, but output collapses away from it without active braking.

Voice coil

A coil moving in a magnetic field, similar to a loudspeaker motor. Broad frequency range and excellent fidelity, but bulkier, heavier, and more expensive.

Piezo

A ceramic bender deforms when voltage, often 24-100 V, is applied. Rise time is 1-5 ms, the element is 0.5-2 mm thick, and there are no wearing mechanical parts.

From a manufacturing perspective, piezo haptics share almost everything with acoustic piezo products: the same ceramic discs, silver electrodes, and bender construction found in piezo buzzers and piezo speakers. We explain the piezo haptic actuator working principles and selection criteria separately, but the key point for buyers is that a supplier with established piezo element production can usually deliver haptic-grade elements with consistent capacitance, displacement, and lot-to-lot behaviour.

Piezo Buzzer manufacturersPiezo Buzzer manufacturers4 Production FactoryView Product →

Head-to-Head Comparison: ERM vs LRA vs Voice Coil vs Piezo

The table below summarises figures that matter when a part is being specified. Values are typical production ranges, not marketing maxima.

Parameter
ERM
LRA
Voice coil
Piezo
Start-up / stop time
50-100 ms
20-50 ms (with braking)
5-15 ms
1-5 ms
Operating band
Tied to motor speed
Resonance-based
Broad
Broad, high-frequency capable
Typical thickness
3-8 mm
2-4 mm
5-12 mm
0.5-2 mm
Drive voltage
2-5 V DC
2-3 V AC
3-12 V
24-100 V
Durability
Brush and bearing wear
Spring fatigue
Coil and suspension aging
Negligible mechanical wear
Relative cost
Low
Low to mid
High
Mid to high
Typical specifications of the four main haptic actuator families. Actual values depend on the selected part, its housing, and the drive circuit.

Notice the inverse relationship between response speed and drive complexity. Piezo requires a boost converter and precision amplifier, but returns repeatable, crisp feedback. If the requirement sheet simply says vibration, an ERM is enough. If it says button-click simulation at the speed the user actually presses, piezo or a voice coil is the honest answer.

The same bender technology appears in thin piezo speakers, which share the ceramic and electrode processes but optimise for sound output. TDA's piezo speaker range is a practical reference for what the ceramic can do in very thin assemblies.

Piezo Speakers ManufacturersPiezo Speakers Manufacturers4 Production FactoryView Product →

The Metrics Engineers Miss When Comparing Haptic Actuators

Rise time is the classic headline number, but five hidden metrics usually decide whether a haptic prototype survives to production. The chart below compares rise time to 80% of target acceleration across actuator types.

ERM
50 ms
LRA
25 ms
Voice coil
8 ms
Piezo
5 ms
Rise time to 80% of target acceleration; lower is better.
  • Temperature drift: piezo capacitance and LRA spring stiffness shift with temperature. An LRA tuned to 175 Hz at 25 degrees C can drift off resonance in a hot automotive cabin, while piezo mainly needs its drive voltage compensated.
  • Audible noise: ERM and LRA often radiate buzzing through the housing. Piezo benders can be kept nearly silent, which is why they appear in quiet medical alarms and premium appliances.
  • Closed-loop control: high-definition haptics usually need feedback. Piezo elements generate a voltage when bent, so they can be self-sensed without adding a separate sensor.
  • Aging: LRA springs soften over millions of cycles and ERM brushes wear. Piezo ceramics age mainly as slow capacitance reduction that a well-designed driver can manage.
  • Magnetic interference: ERM, LRA, and voice coils contain magnets and coils that may disturb nearby magnetic sensors. Piezo is non-magnetic, which simplifies PCB layout in compact IoT products.

For compact devices, an SMD-class piezo assembly using the same termination techniques as an SMD piezo production line can be adapted to haptic elements, reducing assembly cost on the customer side.

SMD Piezo Active Buzzers ManufacturersSMD Piezo Active Buzzers Manufacturers4 Production FactoryView Product →

Where Haptic Actuators Are Used Today

Haptic feedback now extends far beyond smartphones. The distribution below reflects approximate actuator shipment share by application and helps explain why supply-chain standards differ so much between projects.

Consumer and mobile 40%
Automotive 25%
Medical and healthcare 15%
Industrial and others 20%

Consumer and mobile devices are still the volume driver. Smartphones, smartwatches, and trackpads mostly use LRAs, but piezo is gaining in devices where battery life and thickness are critical.

Automotive is the fastest-growing segment. Touchscreen infotainment, steering-wheel switches, and pedestrian-alert systems rely on vibration or acoustic feedback, and automotive-grade requirements push suppliers toward IATF16949 quality systems. Medical devices, in turn, value quiet, precise haptics for alarms and confirmation feedback, which is why ISO13485 appears in the qualification chain.

A Five-Step Workflow for Selecting a Haptic Actuator

Work through this checklist before requesting samples. It shortens the selection loop and avoids the most common rework cycles.

1

Define the effect

Write the required rise time and minimum acceleration at the user surface for a button click, notification, or texture simulation.

2

Set the mechanical budget

Measure available thickness, mass, and mounting area. This step alone often eliminates ERM and voice coils.

3

Check drive electronics

Can the board accept a 24-100 V boost for piezo? Is there an existing amplifier for a voice coil? Estimate total BOM cost.

4

Prototype in the housing

Mount the actuator in the actual enclosure and measure on the housing surface, not on a bench.

5

Qualify over temperature and cycles

Test across the working temperature range and at the target life-cycle count, not just at room temperature.

The cheapest actuator can become the most expensive one if it needs a thicker housing, extra shielding, or a second prototype round for noise. In total cost of ownership, piezo haptics justify their driver cost whenever the product must be thin, quiet, or rated for millions of presses. For commodity alerts with no latency requirement, an LRA remains the safest value choice.

Reliability, Handling, and Compliance Considerations

Piezo elements are ceramic: they handle compression well but are sensitive to sharp mechanical shock and excessive solder heat. Use a controlled reflow profile, avoid bending the element during assembly, and protect the ceramic from moisture ingress with conformal coating if the housing is not sealed.

For ERM and LRA, plan for mechanical wear. Spring fatigue in an LRA shifts its resonant frequency over life, and ERM brush life limits total motor hours. Include these effects in reliability calculations instead of assuming constant performance.

On the compliance side, the obligations most often audited are RoHS substance restrictions, REACH candidate-list reporting, and conflict-minerals disclosure. Automotive and medical customers increasingly require IATF16949 and ISO13485 quality systems. TDA already applies these frameworks to its buzzer and speaker production and can align haptic-element qualification with automotive and medical validation requirements.

The right haptic actuator is not the one with the highest acceleration figure. It is the one whose response time, size, drive voltage, noise, and lifecycle behaviour fit the product you are building.

Start with the mechanical boundary, then choose the actuator family, then perfect the drive. For fast, thin, durable feedback, piezo is hard to beat; for cost-sensitive commodity vibration, LRA and ERM still carry the volume. Define the effect first, and the actuator choice becomes straightforward.